It's kinda simple, but effective, based on the levers you can make it open one door or the other, or neither, because the SR inputs are only 2 3-clocks they'll burn out and self-reset the SR Latch.

Fixed, link was too long..

hehe, thanks ^^

I looked at it again and realized I could alter the design a bit :o.

This way you can now switch on the center lever to cause the SR Latch to act as a 2-clock and pulse the two outputs between 1 1 and 0 0. Pressing one or the other switch will then switch out between which output is on and which is off, all three switches on results in the SR Latch outputing 0 0.

The center switch also acts as a lock for keeping the outputs stable instead of pulsing with the clock inputs.

Nutter795 has encountered technical stuff.
Nutter795 Flee's!

Jackc45 read Nutter795's comment.
Jackc45 realised its technical stuff.
Jackc45 head explodes!

pwner1523 read both comments.
pwner1523 wants to understand it.
pwner1523 got stunned by confuzzuliaty
pwner1523 is stunned for 1 week