Nifty Switch I Just Thought Up

, Thu Dec 23 2010, 12:46AM

LeverControlled

It's kinda simple, but effective, based on the levers you can make it open one door or the other, or neither, because the SR inputs are only 2 3-clocks they'll burn out and self-reset the SR Latch.
Re: Nifty Switch I Just Thought Up
Flightster, Thu Dec 23 2010, 01:14AM

Dual3clocksrlatchleverc

Fixed, link was too long..
Re: Nifty Switch I Just Thought Up
, Thu Dec 23 2010, 01:17AM

hehe, thanks ^^
Re: Nifty Switch I Just Thought Up
, Thu Dec 23 2010, 04:57AM

ClockV2

I looked at it again and realized I could alter the design a bit :o.

This way you can now switch on the center lever to cause the SR Latch to act as a 2-clock and pulse the two outputs between 1 1 and 0 0. Pressing one or the other switch will then switch out between which output is on and which is off, all three switches on results in the SR Latch outputing 0 0.

The center switch also acts as a lock for keeping the outputs stable instead of pulsing with the clock inputs.
Re: Nifty Switch I Just Thought Up
, Thu Dec 23 2010, 11:52AM

Nutter795 has encountered technical stuff.
Nutter795 Flee's!
Re: Nifty Switch I Just Thought Up
, Thu Dec 23 2010, 01:18PM

Jackc45 read Nutter795's comment.
Jackc45 realised its technical stuff.
Jackc45 head explodes!
Re: Nifty Switch I Just Thought Up
, Tue Jan 04 2011, 03:32PM

pwner1523 read both comments.
pwner1523 wants to understand it.
pwner1523 got stunned by confuzzuliaty
pwner1523 is stunned for 1 week